The advantages of Slicer G1800 and SBR1800 Adopts a gear-box form Taiwan which is easy for engaging a gear,doesn't trip stop and has a long life-span SBG1800 appends a transducer for speed adjusting. Flat-figured feed roller is made from 45# seamless steel,and is machined with rolling-figure grinding and hard chrome plating. Long and short cutter shaft location is increased from ф50 to ф55 which is made from 40 chrome,roughly machined,tempered for quality controlling and then grind with precision machining. Balance holes on the cutter wheel and strap wheel are located farer away from each other,which improves the stability of the center between two holes and they will not lose shape. The upper and lower beams are automatically lifted by digital control.It is easy to operate,makes the slice-cutting more accuracy and avoids the slice error produced by hitting the hand wheel when operating on a trolley. The location of electric motor on the upper beam is changed,the location the electric motor of the main wheel id elevated to a higher place,and the grasping force of 10hp electric motor and strap wheel os increased,avoiding the skidding when cutting a slice. The lower cutting plate is sprayed with tungsten steel,can bear abrasion and will not lose shape. The whole knife seat is fixed on a slide carriage.The location can be adjusted according to the material hardness when cutting a slice,which doesn't need to adjust the gap between knife-holder plate or return the knife seat which saves time and effort. There is a conveying wheel added to the front of feed plate and the base of knife seat which saves time and effort. The shaft is of original koyo brand in Japan and has a high precision and good anti-abrasion product quality. The outer wire for electric controlling is hidden from sight.It is safe and looks beatiful. The electric motors and apparatuses are of CE certificated brand. |