Introduction of petroleum resin   Petroleum resins is a kind of thermal plasticizing resin produced by C5, C9 fraction, by-products of petroleum cracking, through pretreatment, polymerization and distillation. It isn't a high polymer but a low polymer with the molecular weight between 300 and 3000. Featured by acid value, easy mutual solubility, resistant to water, resistant to ethanol and chemicals. It has the chemical stabilizing property to acid and alkaline, viscosity adjusting and thermal stabilizing, Generally, the petroleum resins are not used independently, but have to be used together with other kinds of resins as promoters, adjusting agents and modifiers A paints   Paints mainly use C9 petroleum resins, C5/C9 copolymerized resins with high softening points, petroleum resins are added to paints can increase the final finishes of paints, the adhesiveness of paint films and the hardness. Resistance to acid and alkaline. B Rubbers   Mainly use C5 petroleum resins and C5/C9 copolymerized resins with low softening points, these kinds of resins have very good mutual solubility with natural rubber particles, No affect to the sulphuration of rubber. Rubbers added with petroleum resins will increase the strength, adhesiveness and softening property. C Adhesives   Petroleum resins have very good adhesiveness, they can increase the adhesiveness of adhesives, resistance to acid, alkaline and water. Subsequently they will reduce the production cost. D printing inks   Usually, the C9 petroleum resins which hare high softening point are used for printing inks, they hare color spreading, fast dry and brightening effects and will increase the printing property. E Others   Petroleum resins have certain unsaturation property and can be used as paper glutting agents, plastic modifiers etc.   Petroleum resins are non-hazardous products, however the direct sunshine and rain shall be avoided during transportation. They can't be transported together with self-flammable materials, strong oxidizers and strong acid.   Petroleum resins shall be stored in dry and cool area, the storage period is one year, but they can be used again if they out still up to specifications by inspection after one gear.
|