AHG2030 and AHG2012 input and output modules are specially designed for the AHGBUS circular loop technology, adopt SMT techniques and hence share strong anti-interference capability. The AHG2030 input and output modules provide a switch input signal and a relay output. The AHG2012 input and output modules are used for connecting four switch input signals and two relay outputs. Each input of the modules is used to connect the standard detectors and switch input signals. The relay outputs of the modules can be programmed at will so as to control the equipment. It is mainly used to start or stop the blowers, exhaust blowers and elevators, and cut off the power supply for fire-resistance rolling shutters and fire pumps etc. Functional Features: Built-in microcontroller; Low power design and the standby current is not over 80μA; Built-in bar code and automatic identifying and addressing software; Saving installation time and manual work due to none manual setting such as electronic addressing; Broadcast interactive communications and strong anti-electromagnetic interference; Unique individual names for each signal input and output point programmed through the panel at will; Making an automatic test on its operation through its perfect self-diagnostic function; Photoelectric isolation signal input; Direct access to the circular bus without a separate power supply; Making on-line testing and maintenance through the fire alarm control machine. Technical data Moudle : MK-1/1-AHG2030 Operating Voltage : DC19V Operating Current : ≤80μA Output capacity : DC30V/1A Ambient Temperature : -10℃~+55℃ Relative Humidity : ≤95% RH Dimensions : 92mm?—92mm?—52mm Weight : 200g Moudle : MK-4/2-AHG2012 Operating Voltage : DC19V Operating Current : ≤80μA Output capacity : DC30V/1A Ambient Temperature : -10℃~+55℃ Relative Humidity : ≤95% RH Dimensions : 92mm?—92mm?—52mm Weight : 200g |