HELP-80 80W CO2 Laser Power Supply 1.Main features: 1.Good compatibility: It can be applicable to 80W laser tube manufactured by various factories. 2.Cutting type or Sculpting type: The cutting type has a good power stability and strong adaptability; While the sculpting type has a quick response speed and good engraving effect. It can prolong laser tube's service life. 3.Easy Control: The start and stop of laser can be easily controlled by TTL level. 4.The power supply has output open circuit protection. 5.This power supply has TTL signal indication, water Through signal indication and laser output indication. 6.This power supply has the BUTTON to test it work properly 7.Application: Sculpture and cut acrylic, fabric, double color sheet and rubber, etc. 2.Specification: Input Input Voltage AC220V or AC110V(Please specify when placing order) AC Frequency 47---440Hz Max Input power 350W Max Output current 3A Output Max Output voltage DC 25KV Max Output current DC 20 mA Efficiency more than90%(Full load) MTBF more than10000 Hours Response time less than1mS (Time from the TTL Signal is given to the output current up to 90% pre-setting current) Withstand Voltage Input-Output, Input-Enclosure: AC1500V 10mA 60S, Output cathode is connected with enclosure. Weight 2.0KG Environment Operating temperature: (-10-40)degree Celsius,Relative humidity: less than90% Cooling Force-Air Cooling (FAC) Dimesition L?—W?—H=167?—144?—91 (mm)
|