The Thy-18F oil quality analyzer is a portable instrument which measures the effect of contamination and electro-chemical changes that occur in lubricants.
It detects and measures the dielectric constant of oil.
By comparing the measurements obtained from used and unused oils of the same brand,
the oil quality analyzer is able to determine the degree of change in the dielectric constant of the oil.
Dielectric change is directly related to the degradation and contamination level of the oil
and helps the user to optimize intervals between oil changes and to detect increased mechanical wear and loss of the oils lubricating properties. To facilitate trending the instrument is equipped with a numerical read-out.
Main Functions:
1. Determining the degree of contaminate within 5 minutes;
2. Detecting metal particles beyond 60μm;
3. Determining whether the newly purchased lubricant is qualified;
4. Determining whether the lubricant includes light oil;
5. Detecting the percentage of water content below 0.05% within 3 minutes;
Advantages:
1. Maximization and safe extension of intervals between oil changes;
2. Early detection of mechanical failures in conjunction with preventative maintenance procedures;
3. Avoidance of unnecessary engine damage resulting from overly used lubricants;
4. Reduction in the number of costly and unnecessary laboratory analysis of oil samples.
Specifications
The standard Oil Analyzer has the following Specification:
Range: 0, ?‚?±99.9UA
Repeatability: ≤3%
Temperature: -20℃～+55℃
Power: ≤5W
Voltage: 20V
Weight: 5kg
Size: 285*220*115mm
Battery: .6v NI-MH rechargeable Battery
|
