The systems are used for heating and filtration of insulating and lubricating oil in order to clarify from particulates, soot, free and soluble water, alkali, water-soluble acids. The viscosity of oil is not to exceed 70 cSt at temperature +50?‚?°C. How it works The pump drives oil in procession through the mesh filter, inlet valve into the heater. Afterwards warmed up to necessary temperature oil is directed to the pre filter. After preliminary filtration is over the oil goes to the filter. The purified oil through the connecting pipe pours off to the vessel (the vessel does not go with the complete set). Condensate extracted from the oil pours off through the valves.
|