flanges

We provides ASME Code and Non Code Industrial flanges for the Petrochemical, Process, & Waterworks industries. ANSI, API, AWWA pipe flanges in carbon, stainless, alloys and chrome steel. Weld Neck, Slip on, Blind, Threaded, socket weld, Lap Joint, Orifice Flanges in sizes 1/2" to 198".
Welding Neck Flanges:
The welding neck flange is normally referred to as the "high hub" Flange. It is designed to transfer stresses to the pipe, thereby reducing high stress concentrations at the base of the Flange. The welding neck flange is the best designed butt-welded flange of those currently available because of its inherent structural value. It is expensive because of the design.
Threaded (Screwed) Flanges:
The threaded flange is similar to the slip-on flange, but the bore is threaded. Its chief merit is that it can be assembled without welding, explaining its use in low pressure services at ordinary atmospheric temperatures and in highly explosive areas where welding create a hazard.
Slip-On Flanges:
The slip-on flange has a low hub because the pipe slips into the flange prior to welding. It is welded both inside and out to provide sufficient strength and prevent leakage. Slip-on flanges are all bored slightly larger that the O.D. of the matching pipe. They are preferred over welding neck flanges by many users due to their lower initial cost, but final installation cost is probably not much less than that of the welding neck flange because of the additional welding involved.
Lap joint Flanges:
The lap joint flange is practically identical to a slip-on flange except it has a radius at the intersection of the bore and flange race. This radius is necessary to have the flange accommodate a lap joint stub end. Normally, a lap joint flange and a lap joint stub end are mated together in an assembly system.
Blind Flanges:
The blind flange is a flange without a bore. It is used to close off the ends of a piping system and/or a pressure vessel opening. It also permits easy access to the interior of a line or vessel once it has been sealed and must be reopened.
Socket Welding Flanges:
The socket welding flange is similar to a slip-on flange except it has a bore and a counter bore dimension. The counter bore is slightly lager than the O.D. of the matching pipe, allowing the pipe to be inserted into the flange similar to a slip-on flange. The diameter of the smaller bore is the same as the I.D. of the matching pipe. A restriction is built into the bottom of the bore which sets as a shoulder for the pipe to rest on. This eliminates any restriction in flow when using a socket welding flange.
Standard:JB/T81 GB/T9112-9124, HJ20592-20635, SH3406, ANSIB16.5 JISB2220.
Pressure class (Mpa): 0.25--50
Material:Carbon steel(WPB A234), alloy steel,stainless steel
Packing: Fit for sea shipment packing and customer's requirement. Wooden box
We are able to provide customers with quality products and perfect service.
If you want to know more information, please kind to visit our website.

Offers list from this company:

1. [Sell] Seamless tube and pipes
   
2. [Sell] CNG High Pressure Tube
   
3. [Sell] Hydraulic Cylinder
   
4. [Sell] Chrome plate rod bar
   
5. [Sell] Honed Tubes for Hydraulic/ Pneumatic Cylinder
   
6. [Sell] Concrete Pump Pipes
   
7. [Sell] Bi Metal Clad Pipe, Bend
   
8. [Sell] Ceramic Tile Lined Steel Pipes and Elbows
   
9. [Sell] Ceramic Lined Elbows and Bends
   
10. [Sell] Ceramic Lined Elbows and Bends
    
11. [Sell] Abrasion resistant ceramic lined pipe
    
12. [Sell] Forged Steel High-Pressure Fittings
    
13. [Sell] Pipe flange
    
14. [Sell] Pipe reducer, Concentric reducer, Eccentric reducer, Bell reducer
    
15. [Sell] End Cap, Cap fittings
    
16. [Sell] Steel pipe tee, Alloy pipe tee, Stainless pipes tees, Pipe crosses, Reducing tee
    
17. [Sell] Pipe bend, Bend pipe, Pipe bending
    
18. [Sell] Pipe elbows
    
19. [Sell] Weldable Components
    
20. [Sell] flanges
    
21. [Sell] Butt-Welding Pipe cap series
    
22. [Sell] Butt-Welding Tees and Crosses
    
23. [Sell] Pipe Elbow (Seamless and Butt Welded)
    
24. [Sell] Concentric Reducer & Eccentric reducer
    
25. [Sell] pipe coil
    
26. [Sell] Seamless pricision steel tubes
    
27. [Sell] Seamless steel tubes for oil casing and tubing
    
28. [Sell] Seamless steel tubes in large calibers for gas cylinders
    
29. [Sell] Seamless steel tubes in large calibers for high(low and medium) pressure boilers and petrochemical industry
    
30. [Sell] Seamless Steel Pipe and Tubes
    
31. [Sell] Heat Exchanger Tubes(U-Bend or U-Shape)
    
32. [Sell] EN10305 Steel Tubes for Precision Applications
    
33. [Sell] Seamless steel tubes for ships
    
34. [Sell] Steel square and rectangular pipe
    
35. [Sell] Hot Dipped Galvanized Steel Pipe and Tube
    
36. [Sell] JCOE (J-ing, C-ing and O-ing) Pipes
    
37. [Sell] UOE (Uing and Oing forming) Pipes
    
38. [Sell] SSAW (spiral submerged-arc welding) Pipes
    
39. [Sell] ERW Steel Pipe and Tubes
    
40. [Sell] Bend Pipe(Bend Elbows)
    
41. [Sell] Steel pipe fittings series list
    
42. [Sell] Type TG Hydraulic cylinder for self-discharging vehicles
    
43. [Sell] Smooth Bore Cylinder Tube
    
44. [Sell] Concave-shaped straw cushion
    
45. [Sell] stainless steel tubes
    
46. [Sell] Abrasion resistant ceramic lined pipe and elbow