1. HEAT-RESISTANT VARNISH КО-049 Binder in the manufacture of heat-resistant cold drying enamels for protection of parts operating at temperatures of about 300??XC.
2. HEAT-RESISTANT VARNISH КО-075 Preparation of the heat-resistant enamel KO-835. The latter is prepared directly before use by mixing 94 parts by weight of the lacquer and 6 parts by weight of aluminium powder. The enamel is designed for parts operating at temperature of about 500??XC. Protection of separators, gas traps with the fitting, cyclone settlers in oil-fields. Corrosion prevention of external surface of gas ducts, chlorinators, steam and gas turbines, ejectors, different elements of agricultural machines, air drying apparatus, chemical catching equipment, equipment in by-product coke production. Protection of car radiators as well as other elements and equipment operating at 350-400??XC for a long time. Corrosion prevention of internal surface of steam-water tanks operating at 150-160??XC. Sizing and dressing of artificial fur; improvement of resistance of protective clothing to attack by acids; impregnation of filter fabrics to increase serviceability, heat and wear resistance. Release coating in the production of glass and fiberglass plastics; a component of parting paints. Combination of the lacquer KO-075 with pentaphthalic (perchlorovinyl) nitrocellulose enamels provides improvement of the film strength, water, heat and light resistance, water repellency, gloss and hardness.
3. HEAT-RESISTANT VARNISH КО-85FМ Painting of woodwork (without polishing). Manufacture of heat-resistant enamel which presents a mixture of the lacquer and aluminium powder as 100:5. Due to the high resistance to heat, humidity and gasoline the enamel can be used for hardware operating at 300-3500C for a long time as exhaust pipes and ejectors of crawlers, parts of boilers, chimneys and wire ends as well as for restoration of damaged lacquer coatings.
4. HEAT-RESISTANT VARNISH КО-85FМ-1 Insulating, moisture-resistant and impregnating material as well as binder for manufacture of paint?and?lacquer coatings.
5. HEAT-RESISTANT VARNISH KO-08, KO-08K КО-08 Binder for heat-resistant dyed enamels: coatings withstand the operating temperatures of about 400??XC or 600??XC upon adding aluminium powder. Permitted to: use as protective coat for surfaces which are in contact with food stuffs. КО-08K Binder for heat-resistant enamels in combination with inorganic pigments and extenders (operating temperature to 800??XC). Due to good adhesion to steel, titanium, ceramics, glass and copper, the enamel provides the antirust protection of articles made of these materials under any environmental conditions.
6. HEAT-RESISTANT VARNISH КО-815 Manufacture of heat-resistant enamels. The latter are made by mixing the lacquers with aluminum powder. Enamels are designed for hardware which operates at 400-500??XC for a long time.
|
