sell 13.56MHz smart reader MR730 Interface: Ethernet RJ45

MR730 series contactless smart reader is the Ethernet interface desktop reader based on NXP PCD or compatible PCD. It doesn't have display. The reader supports series IC cards according to ISO14443 & ISO15693; various contactless IC card under international standard; especially the contactless CPU cards under ISO14443-4. Meanwhile the reader is available to pass EMV2000 and PBOC 2.0 and be authenticated by many laboratories--Visa Wave & Pay Pass (by FIME) and the Bank Card Test Center. The reader embeds SAM card slot. We do the optimization for application of domestic payment system and so it can support fully SAM card under 9600bps & 38400bps.
Qualifications:
?ˆ? PCD: NXP RC500, RC531, RC632, RC400; FM1722
?ˆ? Working frequency: 13.56MHz
?ˆ? RF standard: ISO14443A, ISO14443B, ISO15693
?ˆ? Operating distance: 80mm (Mifare One, typical distance)
?ˆ? SAM card slot: 1 slot, supported ISO7816 T=0, supported 9600bps&38400bps
?ˆ? Interface: Ethernet RJ45
?ˆ? Baud rate: 9600 ~ 115200 BPS
?ˆ? Power supply: DC5V
?ˆ? Power consumption: 1.5W
?ˆ? Dimension: 141mm?—100mm?—31mm
?ˆ? Weight: about 100g
?ˆ? Operating temperature: -25 ~ +85 ℃ (-77 ~ +185?°F)
?ˆ? Storage temperature: -40 ~ +125 ℃ (-104 ~ +257?°F)

Offers list from this company:

1. [Sell] Sell 13.56 MHz rfid module JMY602 IIC, UART, RS232C or USB
   
2. [Sell] Sell 13.56 MHz rfid module JMY603 Interface: UART(TTL Level)
   
3. [Sell] Sell 13.56 MHz rfid module JMY601 Interface: UART(TTL Level))
   
4. [Sell] sell 13.56MHz rfid module JMY680 IIC, UART, RS232C or USB
   
5. [Sell] sell 13.56MHz smart reader MR730 Interface: Ethernet RJ45
   
6. [Sell] smart reader MR800 USB PC/SC
   
7. [Sell] rfid reader MR761 USB HID
   
8. [Sell] rfid module JMY501 IIC & UART