The Process flow:
Waste tyre?ˆ”ring cutter ?ˆ“strip cutter ?ˆ“dice cutter?ˆ”crushing--- filtering--magnetic screening?ˆ”rubber powder
Processing method:
Physic mechanical crushing method at normal temperature of waste tyre:nochemical raw material is required,no waste gas,washte water and soot are discharged, and the cooling water of the equipment is reused,no emission,equipment noise is within the range specified by the country(GB20055-2006),fineness of rubber powder produced by it is adjustable(10 meshes to 30 meshes),take waste tyre as example,the process is as follows:breaking down,crushing,filtering,magnetic separating,grin-ding,then the finished products are produced.
1. Tyre ring cutter This machine is mainly to cut the inner diamater of the tyre, and cut the side of the tyre to the next step of segmentation.
Model Motor power Working range Working quatity Size of figure weight of equipment
GLQQ-1 3 kw 750-1200tyre 25-30strips/h 1600?—900?—1500 300kg
2. Tyre strips cutting machineStrips cutting machine can cut cycle machine to remove the wire tire sidewall cut into strips, and the width of the adjustable section. Two circular knives for special materials, hard and durable, can be used repeatedly grinding for no more than 1200 steel tires.
Model Motor power Working range Working diamater Size
of discharge Size
of equipment Weight
of equipment
GLQT-1 4 kw 10strips/h Less 1200 35-55 1400?—800?—1550 800kg
3. Tyre block cutting machineCutting machine can cut a tire strip, cut block, tool for the alloy cutting tools, nearly 9-11 tons per day, cutting tools are not sharp and repeated grinding.
Model Motor power Capacity Size of discharge Size of equipment Weight of equipment
GLQK-1 7.5 KW 0.8-1.5t/h 35*35*35 1000?—900?—1150 550kg
? 4. Tyre crushing machine and screening equipment
Waste Rubber equipment consist of the decomposition of waste tire facilities, mill group, screening magnetic powder delivery unit.Through the tyre bead ring cutting off machine, tyre strips cutting machine and the tyre rim cutting machine , first tyre processed into 3.5 cm square pieces; then type on the rubber mill group GLKP400/450/560 blocks havebroken ground wire mixed powder.
Model Roller diameter?—
length
mm Roll ratio Front roll speedM/min capacityKg/h Max distance of roll mm Motor
KW Dimension (mm) Weight Kg
GLKP-560 510?—800560?—800 1:1.39 27.14 2000 15 75 5620?—2260?—1900 19000
Contact: Mary Ma? Mobile? :0086-13939083462? TEL:? ? ? ? ? 86-371-60317344? FAX:? ? ? ? ? 86-371-60317344 ? Email:gashili002@gmail.com? yahoo:gashili002@yahoo.com? msn:? ? gashili002@hotmail.com? skype:? ? ? ? gashili002 |
