Swallow spikes - a good solution for swallow control as a preventive measure. We do not want swallows build their nests on the facade of our property, has the opportunity to prevent this with a swallow control. Swallows spikes have long spikes and efficiently prevent the landing and nesting of swallows under eaves. They are mounted in the eaves of the house - at precisely the angle between the house wall and roof overhang. The swallow control prevents preemptively that swallows find a landing and nesting. Very important When installing a swallow save the period from September to March should be chosen because no swallows nesting at this time. Specification Material: 1.4301 stainless steel (a rotting is almost impossible) 1 ? 1m stainless steel strip 4 row spikes S.S Strip thickness 2cm Spikes wire 115mm / 145mm long, diameter 1.5mm Covering width up to max. 150mm Install: On the base plate (volume) pre-drilled holes are provided. Installation can be done by screwing, nailing or by spot gluing with a mounting adhesive. The bar is easily divisible with pliers to required length. It is screwed directly against the wall under the eaves. Stainless steel swallow spikes
|