Manufacture and supply of titanium slabs and titanium ingots ASTM Grade 2;
ASTM Grade 3, ASTM Grade 4; Ti6Al/4V; ASTM Grade 5; ASTM Grade 9
We offer you having familiarized with output and supply of titanium slabs, titanium ingots of Fiko Electron-Beam Metallurgical plant and also with range of supplied titanium slabs and ingot of Fiko and with shorten technology of titanium slabs and titanium slab melting and also titanium ingots.
Titanium slabs and titanium ingots or titanium slab or ingot can be produced and supplied as:
a) CP (commercially pure) titanium slabs and ingots which are allotted to titanium slabs and ingots, titanium slab and ingot with low oxygen content 0.04-0.08% and with alloyed oxygen and iron content as per ASTM Grade-1; ASTM Grade-2; ASTM Grade-3, ASTM Grade-4.
b) titanium slabs and ingots with ligature supplement i.e.titanium slabs and titanium ingots from alloys. Titanium slabs and ingots with ligature supplement melted according to ASTM Grade-1; ASTM Grade-2; ASTM Grade-3, ASTM Grade-4; ASTM Ti6Al/4V; ASTM Grade-5; ASTM Grade-9, titanium slab and titanium ingot, titanium slabs and titanium ingots according to GOST VT6, Ti6AL/4V, VT20, VT20, VT23, OT4, OT4-0, OT4-1, VT1-0, VT1-00, VT8, VT9, VT25, VT14, VT15, 2 VT, 3M, VT16, VT3-1, VT5, VT5-1, PT3V, SP3V, PT7M, PT1-M, Grade1, Grade2, Grade5, VT18, VT18U, Alloy 14, Alloy19, Alloy27, Alloy40, Alloy37, AlloyTS6, AT3, AT6.
c)Titanium slabs and ingots, titanium slab and ingot are manufactured in different diameters.
FIKO metallurgical plant produced titanium ingots dia 370mm, dia 400mm, and dia. 630mm. At present a new melting facility is being constructed which aimed to melt titanium ingots dia 800mm, 860mm. But if it requires titanium bars including titanium-forged bars, titanium turned bars dia.450-650mm so it is necessary titanium ingot dia. 800, 860mm for manufacture of abovementioned titanium bar.
Fiko Electron-Beam Metallurgical plant supplied following titanium slabs upon customer request:
a) titanium slabs and titanium slab
b) titanium slabs and titanium slab
Titanium slabs and titanium slab can be supplied both turned and not turned.
Fiko Electron-Beam Metallurgical plant will have possibility to melt slabs of nearly 12 000 kg mass.
It is the same situation with titanium ring, titanium flanges, titanium disks, titanium squares, and titanium billets. Depending on diameter of titanium ring, titanium flange, titanium disk, titanium square or titanium billet it is taken corresponding diameter of titanium ingot or the specific size of titanium slab.
In case titanium ring, titanium flange, titanium disk, titanium square or titanium billet have to have mechanical properties so titanium slab or titanium ingot do not suit for them we should manufacture them from titanium bars both forged titanium bars and hot rolled titanium bars.
3. Titanium slabs and ingots are produced in different lengths.
We melted titanium ingots with length 1000mm and more. The new facility will be able to melt titanium ingots up to 4000mm in length.
Titanium slabs and titanium slab is subdivided into following:
a) titanium slabs or titanium slab by width
b) titanium slabs or titanium slab by thickness
c) turned or not turned titanium slabs
4. Titanium slabs and ingots, titanium slab and ingot are produced in different weight.
The weight of titanium ingots produced by us before weighted 700 to 3200 kg. With new melting furnace we will have possibility to melt ingots of nearly 12 000 kg mass.
The main parameters of titanium slabs and ingots, titanium slab and ingot depend on market demands. For production of titanium bars the most suitable will be titanium ingot dia 370mm, for rolling of titanium sheets and titanium plates the ingots with dia 630-860mm are the best choice. Moreover titanium sheets and plates are better manufactured from titani |
