new products for valves

Manifold Valves:
Manifold valves are widely used in the industrial fittings to reduce the cost of installation and prevent potential leakage. They help to simplify piping, improve the appearance and reduce the space requirements. These valves can further be customized according to a preferred connection type such as sockets, threaded, flare or o-ring face etc and are available in different configurations and styles for a wide range of process control applications. The device helps to control flow, pressure, level, distribution and blow down of water. Valve Manifolds are also available in either a block, single flange or double flange connection for remote or direct installation.



Blowdown Valves:
The blowdown valves are a very popular category of pipe valves, used in a wide variety of applications. They are used for operation in open position. The main function of blowdown valve is mainly to control a continuous flow of steam /fluid under high differential pressure. The outstanding feature of this type of valve is that it can maintain fluid tightness and it is easily operated without the help of any wedging action.
Uses of blowdown valves:
Certain uses of these valves are as follows:
These valves are appropriate for use with air compressors.
They are used to help in the removal of slug and unwanted materials after cleaning the pipes.
Blow down valves are found on the water feeders.
They are also used to lower water cut-offs.
They can control the concentration of solids in the boiler.
Tilting check Valve:
( DISK TYPE ) , (API 6A) CARBON STEEL BOLTED BONNET
BODY : ASTM ?ˆ“A351 CF8 /DISK :ASTM ?ˆ“ 351 CF8 BW
BODY SEATING : AISI ?ˆ“ 304
DISK SEATING : AISI ?ˆ“ 304 1500LB 3"
Class 300 Tilting Check Valve
Bolted, Cover, Swing Type Disc, Threaded of Welded Seat Ring
Standards Compliance:
Basic Design: BS1868
Face to Face Dimension: ANSI B16.10
End to End Dimension: ANSI B16.10
Flange End:
2"-24" to ANSI B16.5
>24": to MSS SP-44 to APS 605 on request B.W.Ends to AMSI B16.25 Manufacturing to NACE MR-01-75 on request
Type of Valves:
A valve is a piping components complete with operating system, able to control or shut off a fluid flow Valves are divided in:
Ball Valve, Butterfly Valve, Check Valve, Gate valve, Globe Valve, Plug Valve, Power Station Valves, Y-Type Strainer, New Products
?© PipeFitting.Asia | E-mail: pfAsia8@gmail.com

Offers list from this company:

1. [Sell] Nickel base alloys (Ni-based)
   
2. [Sell] Copper base alloys (Cu-based)
   
3. [Sell] Cobalt base alloys (Co-based)
   
4. [Sell] Iron base alloys (Fe-based)
   
5. [Sell] new products for valves
   
6. [Sell] Ball Valves
   
7. [Sell] Butterfly Valves
   
8. [Sell] Check Valve
   
9. [Sell] Gate Valve
   
10. [Sell] Globe Valves
    
11. [Sell] Plug Valve
    
12. [Sell] Power Station Valves
    
13. [Sell] Y Type Strainer
    
14. [Sell] Pipe Valves
    
15. [Sell] Spherical Flange Nuts
    
16. [Sell] Blind Flanges
    
17. [Sell] Lap Joint Flanges
    
18. [Sell] Orifice Flanges
    
19. [Sell] Reducing Flanges
    
20. [Sell] Slip-on Flanges
    
21. [Sell] Socket Weld Flanges
    
22. [Sell] Spectacle Blind Flanges
    
23. [Sell] Flange bolts
    
24. [Sell] Pipe Flanges
    
25. [Sell] U Bend tube
    
26. [Sell] Pipe bending
    
27. [Sell] pipe elbow
    
28. [Sell] Tee and Cross
    
29. [Sell] pipe reducer
    
30. [Sell] Coupling(Full & Half) Fittings
    
31. [Sell] Stub Ends (Lap Joint)
    
32. [Sell] pipe cap
    
33. [Sell] Pipe Fittings