Lap Joint Flanges

Lap Joint flanges are used on piping fitted with with lapped pipe or with lap joint stub ends. The lap joint flange with the stub end assembly are normally used in systems requiring frequent dismantling for inspection and cleaning and where the ability to swivel flanges and to align bolt holes materially eases the erection of large diameter or unusually stiff piping. These flanges are also used in applications where there is a need to facilitate bolt alignment.
These type of flanges are similar to slip-on flanges. The only difference is that it has a curved radius at the bore and face to accommodate a lap joint stub end. They may be used at all pressures and are available in a full size range. These lap joint flanges slip over the pipe, and are not welded. They are otherwise fastened to it. Here the bolting pressure is transferred to the gasket by the pressure of the flange against the back of the pipe lap.
Material:
Carbon Steel : ASTM A 105, ASTM A 181
Alloy Steel : ASTM A 182, GR F1, F11, F22, F5, F9, F91
Nickel Alloys : Monel 400 & 500, Inconel 600 & 625, Incolloy 800, 825, Hastelloy C22,C276
Copper Alloys : Copper, Brass & Gunmetal
Size : 1/8" NB TO 48"NB.
Class : 150#, 300#,400 #,600#,900#, 1500# & 2500 #.
Standard:
ANSI : ANSI B16.5, ANSI B16.47, MSS SP44, ANSI B16.36, ANSI B16.48
DIN :DIN2527, DIN2566, DIN2573, DIN2576, DIN2641, DIN2642, DIN2655, DIN2656, DIN2627, DIN2628, DIN2629, DIN 2631, DIN2632, DIN2633, DIN2634, DIN2635, DIN2636, DIN2637, DIN2638, DIN2673
B.S : BS4504 , BS4504, BS1560, BS10
Advantages of Lap Joint Flanges:
Lap Joint flanges have certain special advantages over other flanges. These are as follows:
Lap Joint flanges have the freedom to swivel around the pipe. This facilitates the lining up of opposing flange bolt holes.
Lack of contact with the fluid inside the pipe leads to the greater durability of these flanges.
In piping systems which corrode or erode quickly, the lap joint flanges may be salvaged for re-use.
The pressure-holding capacity of lap joint flanges is little. But it is better than that of slip-on flanges.
The Lap Joint works as a backing ring on the stub.
The main advantage of lap joint flange is that the bolt holes can be aligned with the matching flange after the welds have been completed.
They allow rotational alignment capability.
Type of Flanges:
A flange is used to mechanically connect two pipes together.
Blind Flanges, Lap Joint Flanges, Orifice Flanges, Reducing Flanges, Slip-on Flanges, Threaded Flanges, Weldneck Flanges, Large size Flanges , Socket weld Flanges, Spectacle Blind Flanges, Pipe Flange Bolts, Pipe Flange Gaskets
?© PipeFitting.Asia | E-mail: pfAsia8@gmail.com

Offers list from this company:

1. [Sell] Nickel base alloys (Ni-based)
   
2. [Sell] Copper base alloys (Cu-based)
   
3. [Sell] Cobalt base alloys (Co-based)
   
4. [Sell] Iron base alloys (Fe-based)
   
5. [Sell] new products for valves
   
6. [Sell] Ball Valves
   
7. [Sell] Butterfly Valves
   
8. [Sell] Check Valve
   
9. [Sell] Gate Valve
   
10. [Sell] Globe Valves
    
11. [Sell] Plug Valve
    
12. [Sell] Power Station Valves
    
13. [Sell] Y Type Strainer
    
14. [Sell] Pipe Valves
    
15. [Sell] Spherical Flange Nuts
    
16. [Sell] Blind Flanges
    
17. [Sell] Lap Joint Flanges
    
18. [Sell] Orifice Flanges
    
19. [Sell] Reducing Flanges
    
20. [Sell] Slip-on Flanges
    
21. [Sell] Socket Weld Flanges
    
22. [Sell] Spectacle Blind Flanges
    
23. [Sell] Flange bolts
    
24. [Sell] Pipe Flanges
    
25. [Sell] U Bend tube
    
26. [Sell] Pipe bending
    
27. [Sell] pipe elbow
    
28. [Sell] Tee and Cross
    
29. [Sell] pipe reducer
    
30. [Sell] Coupling(Full & Half) Fittings
    
31. [Sell] Stub Ends (Lap Joint)
    
32. [Sell] pipe cap
    
33. [Sell] Pipe Fittings