Socket Weld Flanges

Socket Weld Flanges
Socket welding flange, a popular type of pipe flange, was initially developed for use on small-sized high- pressure piping. The fabrication of this type of flange is similar to that of a slip-on flange. However, the internal pocket of a socket weld flange allows for a smooth bore and better fluid flow. When provided with an internal weld, the static strength of this flange is equal to slip-on flange, but the fatigue strength is 50% greater than double welding slip-on flanges. Smooth bore conditions in such a flange can easily be attained without having to bevel the flange face and, after welding, to re-face the socket weld flange as would be required with slip-on flanges. For this reason, the internally welded flange is popular in chemical process piping.
The counter bore is sightly larger than the Outer Diameter of the matching pipe, allowing the pipe to be inserted. A restriction is built into the bottom of the bore, which acts as a shoulder for the pipe to rest on, and has the same I.D. of matching pipe. The flow is not restricted in any direction.
Key Features:
The recess on the inside diameter of the socket weld flange allows for a good fit of the pipe allowing for a smooth flow of liquid.
Socket welding flanges work well for smaller sizes and higher pressure temperature conditions.
They are similar to slip-on flanges, but must specify the schedule of the pipe where they will be used for with socket welds.
Standard facing:
Raised face, ring - type, flat face, male - female, tongue - groove.welded both inside and out to provide sufficient strength and prevent leakage.They are ideal for low pressure applications.
Uses of socket weld flanges:
They are ideal for small diameter applications.
They are used for high pressure applications.
Socket weld flanges have an internal recess on the inside diameter which allow for a smoot flow of the process fluid.
They create a smooth bore with the proper welding and grinding.
Types of Flanges
Blind Flange Lap joint flange Orifice flange Reducing flange Slip-on flange Threaded flange Weldneck flange Large-size flange Socket-weld flange Spectacle-blind flange Pipe flange blots Pipe flange gaskets
?© PipeFitting.Asia | E-mail: pfAsia8@gmail.com

Offers list from this company:

1. [Sell] Nickel base alloys (Ni-based)
   
2. [Sell] Copper base alloys (Cu-based)
   
3. [Sell] Cobalt base alloys (Co-based)
   
4. [Sell] Iron base alloys (Fe-based)
   
5. [Sell] new products for valves
   
6. [Sell] Ball Valves
   
7. [Sell] Butterfly Valves
   
8. [Sell] Check Valve
   
9. [Sell] Gate Valve
   
10. [Sell] Globe Valves
    
11. [Sell] Plug Valve
    
12. [Sell] Power Station Valves
    
13. [Sell] Y Type Strainer
    
14. [Sell] Pipe Valves
    
15. [Sell] Spherical Flange Nuts
    
16. [Sell] Blind Flanges
    
17. [Sell] Lap Joint Flanges
    
18. [Sell] Orifice Flanges
    
19. [Sell] Reducing Flanges
    
20. [Sell] Slip-on Flanges
    
21. [Sell] Socket Weld Flanges
    
22. [Sell] Spectacle Blind Flanges
    
23. [Sell] Flange bolts
    
24. [Sell] Pipe Flanges
    
25. [Sell] U Bend tube
    
26. [Sell] Pipe bending
    
27. [Sell] pipe elbow
    
28. [Sell] Tee and Cross
    
29. [Sell] pipe reducer
    
30. [Sell] Coupling(Full & Half) Fittings
    
31. [Sell] Stub Ends (Lap Joint)
    
32. [Sell] pipe cap
    
33. [Sell] Pipe Fittings