Blind Flanges

Blind Flanges
The blind flange is used to close ends of piping systems. It is a kind of round plate with no center hold but with all the proper bolt holes. This blind flange is available in various sizes and materials and is used to provide positive closer on the ends of pipes, valves or equipment nozzles. This flange helps in easy access to a line once it has been sealed. The blind flange is sometimes custom made or machined to accept a nominal sized pipe to which reduction is being made. This reduction can be a threaded reduction or welded reduction.
Grades :
F304, 304L, 304H, 316, 316L, 316Ti, 310, 310S, 321, 321H, 317, 347, 347H,904L Duplex stainless steel UNS S31803, 2205, Super Duplex stainless steel UNS S32750
Class:
Class 150, Class 300, Class 400, Class 600, Class 900, Class 1500
Features of blind flanges:
Some important features of blind flanges are as follows:
Blind flanges are sometimes supplied with NPT fittings which allow pressure test connections to be fitted.
They are used to blank off the ends of pipe.
They are also used to blank off the ends of valves and pressure vessel opening.
Considering factors like internal pressure and bolt loading, blind flanges, especially in the larger sizes, are the most highly stressed of all types of flanges.
Since the maximum stresses in a blind flange are bending stresses at the center, they can safely be allowed to be higher than in other types of flanges.
Blind flanges are made to fit standard pipes in all sizes.
Type of Flanges:
A flange is used to mechanically connect two pipes together.
Blind Flanges, Lap Joint Flanges, Orifice Flanges, Reducing Flanges, Slip-on Flanges, Threaded Flanges, Weldneck Flanges, Large size Flanges , Socket weld Flanges, Spectacle Blind Flanges, Pipe Flange Bolts, Pipe Flange Gaskets
?© PipeFitting.Asia | E-mail: pfAsia8@gmail.com

Offers list from this company:

1. [Sell] Nickel base alloys (Ni-based)
   
2. [Sell] Copper base alloys (Cu-based)
   
3. [Sell] Cobalt base alloys (Co-based)
   
4. [Sell] Iron base alloys (Fe-based)
   
5. [Sell] new products for valves
   
6. [Sell] Ball Valves
   
7. [Sell] Butterfly Valves
   
8. [Sell] Check Valve
   
9. [Sell] Gate Valve
   
10. [Sell] Globe Valves
    
11. [Sell] Plug Valve
    
12. [Sell] Power Station Valves
    
13. [Sell] Y Type Strainer
    
14. [Sell] Pipe Valves
    
15. [Sell] Spherical Flange Nuts
    
16. [Sell] Blind Flanges
    
17. [Sell] Lap Joint Flanges
    
18. [Sell] Orifice Flanges
    
19. [Sell] Reducing Flanges
    
20. [Sell] Slip-on Flanges
    
21. [Sell] Socket Weld Flanges
    
22. [Sell] Spectacle Blind Flanges
    
23. [Sell] Flange bolts
    
24. [Sell] Pipe Flanges
    
25. [Sell] U Bend tube
    
26. [Sell] Pipe bending
    
27. [Sell] pipe elbow
    
28. [Sell] Tee and Cross
    
29. [Sell] pipe reducer
    
30. [Sell] Coupling(Full & Half) Fittings
    
31. [Sell] Stub Ends (Lap Joint)
    
32. [Sell] pipe cap
    
33. [Sell] Pipe Fittings